CS Cheimcal Test Methods

Pollution  Test

Pressure sensitive tape is used in a variety of applications including duct tape,
electrical tape, masking tape, packaging, double-sided tape, bandages,
medical devices, and other uses.

CS Chemical Test Methods

Pollution  Test

In the case of protective adhesives, no external factors (pressure, UV, humidity, etc.) shall contaminate the surface of the cladding to be protected.

Testing Procedure

Test specimen
Test specimen
Take three pieces of the test specimen, each of which is 100mm wide and about 200mm long. Cut the test specimen with a sharp knife so that the edges are not damaged. There shall be no dust or other foreign substances on the adhesive surface of the part being tested.
Test specimen
Test plate
Test plate
Attach the test specimen to the stainless steel plate. Stainless steel plates must be cleaned and completely dried with solvents to prevent debris before use.
Test plate
Result
Result
The test plate attached to the test specimen shall be set at a temperature of 232°C and a relative humidity of 50±5% for at least five minutes. After a certain period of time of politics, we inspect the surface of stainless steel plates for contamination by leaving them at the desired conditions such as high temperature, UV, humidity, and pressure.
Result